New Updated Cisco ICND2 200-101 Real Exam Download 251-260

QUESTION 251

A network administrator is configuring ACLs on a Cisco router, to allow traffic from hosts on networks 192.168.146.0, 192.168.147.0, 192.168.148.0, and 192.168.149.0 only. Which two ACL statements, when combined, are the best for accomplishing this task? (Choose two.)

A.       access-list 10 permit ip 192.168.146.0 0.0.1.255

B.        access-list 10 permit ip 192.168.147.0 0.0.255.255

C.        access-list 10 permit ip 192.168.148.0 0.0.1.255

D.       access-list 10 permit ip 192.168.149.0 0.0.255.255

E.        access-list 10 permit ip 192.168.146.0 0.0.0.255

F.        access-list 10 permit ip 192.168.146.0 255.255.255.0

Correct Answer: AC

QUESTION 252

In which solution is a router ACL used?

A.       filtering packets that are passing through a router

B.        to change the default administrative distance of a route in the route table

C.        protecting a server from unauthorized access

D.       controlling path selection, based on the route metric

Correct Answer: A

QUESTION 253

Which IPsec security protocol should be used when confidentiality is required?

A.       MD5

B.        PSK

C.        AH

D.       ESP

Correct Answer: D

QUESTION 254

What is the result of issuing the frame-relay map ip 192.168.1.2 202 broadcast command?

A.       defines the destination IP address that is used in all broadcast packets on DCLI 202

B.        defines the source IP address that is used in all broadcast packets on DCLI 202

C.        defines the DLCI on which packets from the 192.168.1.2 IP address are received

D.       defines the DLCI that is used for all packets that are sent to the 192.168.1.2 IP address

Correct Answer: D

QUESTION 255

Refer to the topology. If most of the communication is between hosts and the servers, which switch is best as the root switch for VLAN 20?

A.      Sw-A

B.      Sw-B

C.      Sw-C

D.      Sw-D

E.       Sw-E

Correct Answer: E

QUESTION 256

Refer to the topology. If Sw-E is the root for all VLANs, which of the following is a valid path from host A to Server 1?

A.       Sw-A, Sw-D

B.        Sw-A, Sw-E, Sw-D

C.        Sw-A, Sw-B, Sw-C, Sw-D

D.       Sw-A, Sw-E, Sw-C, Sw-D

E.        Sw-A, Sw-E, Sw-A, Svv-D

Correct Answer: D

QUESTION 257

Refer to the topology. What technology helps prevent frames from looping continuously through this switched network?

A.      ARP

B.      VTP

C.      STP

D.      EIGRP

E.       CSMA/CD

Correct Answer: C

QUESTION 258

Refer to the topology. What, if anything, is required for communication to occur between the host C and Server 3?

A.       DHCP

B.        a router

C.        nothing is required

D.       trunk link between Sw-B and Sw-E

Correct Answer: B

QUESTION 259

Refer to the topology. What type of link is needed between Sw-A and Sw-B so host C and host D can communicate through Sw-A to the servers?

A.       trunk

B.        access

C.        multi-access

D.       straight-through

Correct Answer: A

QUESTION 260

Riverside Towing is redesigning the network that connects its three locations. The administrator gave the networking team 192 168.45 0 to use for addressing the entire network. After subnetting the address, the team is ready to assign the addresses. The administrator plans to configure ip subnet-zero and use RIP v2 as the routing protocol. As a member of the networking team, youmust address the network and at the same time conserve unused addresses for future growth. With those goals in mind, drag the host addresses on the left to the correct router interface. One of the routers is partially configured. Move your mouse over a router to view its configuration. Not all of the host addresses on the left are necessary.

Select and Place:

Correct Answer:

Download Latest Complete Collection of ICND2 200-101 Real Exam ,help you to pass exam 100%.

Ensurepass Cisco Certifications Exam Questions and Answers
Ensurepass CCNA Exams Questions and Answers